Table of Contents
Advertisement
point is always the top level, i.e. the main menu.). This is the 'breadcrumb' style that
is seen at the top of the menu window.
3.1.1. Front Panel
When the unit powers up, the front panel will be locked and no configuration
changes will be able to be performed without unlocking it. With the front panel
locked, it is still possible to view the status of:
• Hostname (serial number)
• IP address
• System Location
• Software Version installed in the unit.
As well as to set the LCD to display only the meters.
To scroll through the parameters, simply press the encoder up or down. Pressing
the encoder to the right expands the display of the selected field.
3.1.2. Unlocking The Front Panel
To unlock the front panel control:
• Navigate to the Password field. (The password field is the default field
selected when the AERO.10 boots up.)
Password
• Press the encoder to the right. A keyboard screen will appear.
Note!
A password it required to unlock the unit's front panel controls.
The default factory password is "1234".
field
Figure 16: Locked Front Panel Screen
30
Advertisement
Table of Contents
