Table of Contents
Advertisement
Linear Acoustic AERO.ASI User Guide
Introduction to AERO.ASI
1.9
Compliance
Simply setting up the AERO.ASI in-line and assigning a factory preset (other than Protection Limit,
which is essentially Bypass) will result in smooth, viewer-pleasing audio and compliance.
The next step is to make sure that the average audio loudness matches the target loudness value set in
the final encoder. Using the built-in metering makes this process simple. Choose ONE of these pro-
cesses to match loudness targets:
Adjust the program's Output Level until the meter matches the target.
Figure 1-24 Adjusting Output Level so the meter matches the target
- OR -
28
Advertisement
Table of Contents
