Important Setup Parameters; Reference; Clock Reference Set To Asi - Linear Acoustic AERO.ASI User Manual

Linear Acoustic AERO.ASI User Guide
1.5

Important Setup Parameters

1.5.1

Reference

The AERO.ASI reference MUST be set to ASI.
Other options are also present for non-DVB-ASI testing. The unit can be referenced to:
• AES DARS (or any AES signal applied to the Ref In connector);
• AES In 1
• ASI
• Internal 48 kHz (standalone use only).
For use with DVB-ASI I/O, Clock Reference MUST be set to ASI!
NOTE:
Figure 1-7 shows the clock reference set to ASI and a pop up note indicating this.
Figure 1-7 Clock Reference set to ASI
18
Introduction to AERO.ASI