Frequency; Volts Per Hertz; Harmonics 1 - GE 845 Instruction Manual

FREQUENCY

Frequency

Volts Per Hertz

Harmonics 1

6–10
Zero Sequence Angle (V0 Angle) 0.0°
Range: 0.0 to 359.9°
Positive Sequence Angle (V1 Angle) 0.0°
Range: 0.0 to 359.9°
Negative Sequence Angle (V2 Angle) 0.0°
Range: 0.0 to 359.9°
Path:
Metering > Frequency 1 - J
Frequency (Current Input J1-CT) 0.000 Hz
Range: 2.000 to 90.000 Hz
Frequency (Phase Voltage Input J2-3VT) 0.000 Hz
Range: 2.000 to 90.000 Hz
Frequency (Auxiliary Voltage Input J2-Vx) 0.000 Hz
Range: 2.000 to 90.000 Hz
Path:
Metering > Volts per Hertz 1(2)
VOLTS PER HERTZ 1 (2)
Range: 0.00 to 4.00 V/Hz in steps of 0.01
Default: 1.00 V/Hz
All values relate to phase currents measured on the input card J1.
Path:
Metering > Harmonics 1 - J1 Current
Phase A Total Harmonic Distortion (Phase A THD) 0.0 %
Range: 0.0 to 100.0 %
Phase B Total Harmonic Distortion (Phase B THD) 0.0 %
Range: 0.0 to 100.0 %
Phase C Total Harmonic Distortion (Phase C THD) 0.0 %
Range: 0.0 to 100.0 %
Phase A Second Harmonic (Phase A 2) 0.0 %
Range: 0.0 to 100.0 %
Phase B Second Harmonic (Phase B 2) 0.0 %
Range: 0.0 to 100.0 %
Phase C Second Harmonic (Phase C 2) 0.0 %
Range: 0.0 to 100.0 %
845 TRANSFORMER PROTECTION SYSTEM – INSTRUCTION MANUAL
CHAPTER 6: METERING