Connecting Enervista 8 Series Setup Software To The Relay; Using The Quick Connect Feature - GE 845 Instruction Manual

CHAPTER 3: INTERFACES

Connecting EnerVista 8 Series Setup software to the Relay

Using the Quick
Connect Feature
845 TRANSFORMER PROTECTION SYSTEM – INSTRUCTION MANUAL
13. Select USB as the Interface type.
14. Select the Read Order Code button.
The Quick Connect button can be used to establish a fast connection through the front
panel USB port of a relay, or through the Ethernet port. The following window appears
when the QuickConnect button is pressed:
As indicated by the window, the "Quick Connect" feature can quickly connect the software
to a front port if the USB is selected in the interface drop-down list. Select "USB" and press
the Connect button. Ethernet or WiFi can also be used as the interface for Quick Connect
as shown next.
SOFTWARE INTERFACE
3–17