GE 845 Instruction Manual page 391

CHAPTER 4: SETPOINTS
845 TRANSFORMER PROTECTION SYSTEM – INSTRUCTION MANUAL
POS VARHS PULSE INCREMENT
Range: 0.000 to 1000.000 MVARh in steps of 0.1 MVARh
Default: 10.000 MVARh
The setpoint specifies the positive VARhours threshold pulse increment after which the
output pulse and output operand are set.
POS VARHS PULSE RELAY 3 (X)
Range: Do Not Operate, Operate
Default: Do Not Operate
NEG VARHS PULSE INCREMENT
Range: 0.000 to 1000.000 MVARh in steps of 0.1 MVARh
Default: 10.000 MVARh
The setpoint specifies the positive VARhours threshold pulse increment after which the
output pulse and output operand are set.
NEG VARHS PULSE RELAY 3 (X)
Range: Do Not Operate, Operate
Default: Do Not Operate
EVENTS
Range: Disabled, Enabled
Default: Enabled
TARGETS
Range: Disabled, Self-reset, Latched
Default: Self-Reset
MONITORING
4–287