Rtd Maximums - GE 845 Instruction Manual

CHAPTER 6: METERING

RTD Maximums

NOTE:
NOTE:
845 TRANSFORMER PROTECTION SYSTEM – INSTRUCTION MANUAL
Path: Metering > RTD Maximums
The Temperature can be displayed in Celsius or Fahrenheit degrees. The selection is made
in Setpoints > Device > Front Panel > Display Properties > Temperature Display.
Reset RTD Date/Time
Range: DD/MM/YY hh/mm/ss
Maximum RTD values can be cleared (reset) in by setting the value of RTD Maximums to
"YES". Executing this command loads -40°C as the initial Maximum RTD value.
RTD 1(12) Max 40°C
Range: -40 to 250°C (temperatures < -40°C are displayed as "Shorted" and temperatures >
250°C are displayed as "Open RTD")
RTD 1(12) Max Date/Time
Range: DD/MM/YY hh/mm/ss
01/01/08 00/00/00
01/01/08 00/00/00
RTD MAXIMUMS
6–19