Table of Contents
Advertisement
CHAPTER 3: INTERFACES
845 TRANSFORMER PROTECTION SYSTEM – INSTRUCTION MANUAL
2.
Select the Maintenance > Update Firmware menu item.
3.
The EnerVista 8 Series Setup software requests the new firmware file. Locate the
folder that contains the firmware files to load into the 845 . The firmware filename has
the following format.
4.
EnerVista 8 Series Setup software now prepares the 845 to receive the new firmware
file. The 845 front panel momentarily displays "Upload Mode", indicating that it is in
upload mode.
5.
While the file is being loaded into the 845 , a status box appears showing how much of
the new firmware file has been transferred and the upgrade status. The entire transfer
process takes up to 30 minutes.
6.
The EnerVista 8 Series Setup software notifies the user when the 845 has finished
loading the file. Carefully read any displayed messages and click OK to return to the
main screen. Cycling power to the relay is recommended after a firmware upgrade.
SOFTWARE INTERFACE
3–31
- Quick Links:
- 845 Order Codes
- Protection
Hide quick links:
Advertisement
Table of Contents
