Table of Contents
Advertisement
[MOUNTING INSTRUCTIONS]
• Use the programmable controller under the environment specified in the User's Manual of the
CPU used.
Using the programmable controller outside the general specification range environment could
lead to electric shocks, fires, malfunctioning, product damage or deterioration.
• While pressing the installation lever located at the bottom of module, insert the module fixing tab
into the fixing hole in the base unit until it stops. Then, securely mount the module with the fixing
hole as a supporting point. Improper loading of the module can cause a malfunction, failure or
drop.
For use in vibratory environment, tighten the module with screws.
Tighten the screws within the specified torque range.
Undertightening can cause a drop, short circuit or malfunction.
Overtightening can cause a drop, short circuit or malfunction due to damage to the screws or
module.
• Before installing or removing the module, be sure to shut off all phases of the external power
supply used in the system. Failure to do so may cause damage to the product.
• Do not directly touch the conductive section and electronic parts of the module.
Failure to observe this could lead to module malfunctioning or trouble.
[WIRING INSTRUCTIONS]
• Always confirm the terminal layout before connecting the wires to the module.
• Make sure that foreign matter, such as cutting chips or wire scraps, do not enter the module.
Failure to observe this could lead to fires, trouble or malfunctioning.
[STARTUP/MAINTENANCE INSTRUCTIONS]
• Before cleaning or retightening the mounting screws, be sure to shut off all phases of the
external power supply used in the system.
Failure to turn all phases OFF could lead to electric shocks.
A - 2
CAUTION
!
DANGER
!
DANGER
!
A - 2
Advertisement
Table of Contents
