Mitsubishi Electric QD70D4 User Manual page 114

6 UTILITY PACKAGE (GX Configurator-PT)
6 - 3
(6) Number of parameters that can be set in GX Configurator-PT
When multiple intelligent function modules are mounted, the number of
parameter settings must not exceed the following limit.
When intelligent function modules are installed to:
Q00J/Q00/Q01CPU
Q02/Q02H/Q06H/Q12H/Q25HCPU
Q02PH/Q06PH/Q12PH/Q25PHCPU
Q12PRH/Q25PRHCPU
Q02UCPU
Q03UD/Q04UDH/Q06UDH/Q13UDH/Q26UDH/
Q03UDE/Q04UDEH/Q06UDEH/Q13UDEH/
Q26UDEHCPU
MELSECNET/H remote I/O station
For example, if multiple intelligent function modules are installed to the
MELSECNET/H remote I/O station, configure the settings in GX Configurator so
that the number of parameter settings for all the intelligent function modules does
not exceed the limit of the MELSECNET/H remote I/O station.
Calculate the total number of parameter settings separately for the initial setting
and for the auto refresh setting.
The number of parameters that can be set for one module in GX Configurator-PT
is as shown below.
Target module
QD70D4
QD70D8
Example) Counting the number of parameter settings in Auto refresh setting
Maximum number of parameter settings
Initial setting
Initial setting
12 (Fixed)
24 (Fixed)
This one row is counted as one setting.
Blank rows are not counted.
Count up all the setting items on this screen,
and add the total to the number of settings for
other intelligent function modules to get a grand
total.
MELSEC-Q
Auto refresh setting
512 256
512 256
512 256
512 256
2048 1024
4096 2048
512 256
Auto refresh setting
26 (Max.)
50 (Max.)
6 - 3