2 SYSTEM CONFIGURATION
2.2 Component list
A positioning system using the QD70D consists of the following components.
No.
Product
1
Positioning module
GX Developer
2
GX Configurator-PT SW D5C-QPTU-E
3
Personal computer
4
RS-232 cable
5
USB cable
6
Drive unit
Connection cable
(for connection of
7
QD70D and drive
unit)
2 - 2
Type
QD70D4
QD70D8
SW D5C-GPPW-E
For details, refer to the GX Developer Operating Manual and
"CHAPTER 6 UTILITY PACKAGE (GX Configurator-PT)".
DOS/V personal
(User-prepared)
computer
Refer to the GX Developer Operating Manual for details.
(User-prepared)
RS-232 cable for connection of the CPU module and DOS/V personal
QC30R2
computer.
Refer to the GX Developer Operating Manual for details.
(User-prepared)
USB cable for connection of the CPU module and DOS/V personal
–
computer.
Refer to the GX Developer Operating Manual for details.
(User-prepared)
–
Refer to the drive unit manual for details.
(User-prepared)
Cable for connection of the QD70D and drive unit or mechanical
–
system input signals.
(To be fabricated in reference to the connected device manual and
Section 3.4.2)
Remarks
QD70D
No. of control axes
Differential output type
MELSEC-Q
2
2 - 2