Table of Contents
Advertisement
Table 103 - Switch Information Fields
Field
Description
Host Name
A descriptive name for this switch. The default name is Switch. You can set this parameter on the Admin > Express Setup window.
IP Address
The IP address of this switch. You can configure this setting on the Admin > Express Setup window.
MAC Address
The MAC address of this switch. This information cannot be changed.
Product ID
The model of this switch. This information cannot be changed.
License Level
The type of firmware on the switch: Full or Lite. This information cannot be changed.
CIP Revision
The version of Common Industrial Protocol (CIP) that is supported on this switch. This information cannot be changed.
CIP Serial Number
The CIP serial number. This information cannot be changed.
Serial Number
The serial number of this switch. This information cannot be changed.
Version ID
The hardware version. This information cannot be changed.
Software
The version of IOS that this switch is running. This information is updated when you upgrade the switch firmware.
Contact
The person who is the administrative contact for this switch. You can set this parameter on the Configure > SNMP window.
Location
The physical location of this switch. You can set this parameter on the Configure > SNMP window.
Switch Information
The Switch Information area on the Dashboard displays information about the
switch.
Rockwell Automation Publication 1783-UM007G-EN-P - February 2017
Monitor the Switch
Chapter 8
385
Advertisement
Table of Contents
Need help?
Do you have a question about the Stratix 5400 and is the answer not in the manual?