Important User Information - Allen-Bradley 140G-R Installation Instructions Manual

Important User Information

Read this document and the documents listed in the additional resources section about installation, confi guration, and operation of this equipment
before you install, confi gure, operate, or mantain this product. Users are required to familiariza themselves with installation and wiring instructions
in addition to requirements of all applicable codes, laws, and standards.
Activities including installation, adjustments, putting into service, use, assembly, disassembly, and maintenance are required to be carried out by
suitably trained personnel in accordance with applicable code of practice.
If this equipment is used in a manner not specifi ed by the manufacturer, the protection provided by the equipment may be impaired.
In no event will Rockwell Automation, Inc. be responsible or liable for indirect or consequential damages resulting from the use or application of
this equipment.
The examples and diagrams in this manual are included solely for illustrative purpose. Because of the many variables and requirements asso-
ciated with any particular installation, Rockwell Automation, Inc. cannot assume responsibility or liability for actual use based on the examples
and diagrams.
No patent liability is assumed by Rockwell Automation, Inc. with respect to use of information, circuits, equipment, or software described in this
manual.
Reproduction of the contents of this manual, in whole or in part, without written permission of Rockwell Automation, Inc. is prohibited.
Throughout this manual, when necessary, we use notes to make you aware of safety considerations.
WARNING: Identifi es information about practices or circumstances that can cause an explosion in a hazardous
!
environment, which may lead to personal injury or death, property damage, or economic loss.
ATTENTION: Identifi es information about practices or circumstances that can lead to personal injury or death, property damage, or
!
economic loss. Attentions help you identify a hazard, avoid a hazard, and recognize the consequence.
ARC FLASH HAZARD: Labels may be on or inside the equipment, for example, a motor control center, to alert people to potential Arc
Flash. Arc Flash will cause severe injury or death. Wear proper Personal Protective Equipment (PPE). Follow ALL Regulatory requirements
for safe practices and for Personal Protective Equipment.
SHOCK HAZARD: Labels may be on or inside the equipment, for example, a drive or motor, to alert people that dangerous voltage
may be present.
PINCH POINT LABEL: Labels may be on or inside the equipment, for example, a drive or motor, to alert people that cut/crush hazard
may be present.
READ INSTRUCTION SYMBOL: Labels may be on or inside the equipment, for example, a drive or motor,
to alert people to read the Instruction Manual of the equipment.
At the end of its life, this equipment should be collected separately from any unsorted municipal waste
DIR 1000682R0002 Version 03
(3)