Device Manager - Allen-Bradley Stratix 5400 User Manual

Figure 25 - Switch Stack in a Ring Topology
Figure 26 - Switch Stack in a Linear Topology
You can configure a stack in either a ring topology
topology (Figure 26).
Table 59 lists the supported features for horizontal stacking.
Table 59 - Supported Features
Feature Type
Layer 2 features
Layer 3 features
Power over Ethernet (PoE)
Traffic types
Features that are not listed in
features include, but are not limited to, the following:

• Device Manager

• CIP
• Layers 2 NAT
• PRP
• PTP
Rockwell Automation Publication 1783-UM007G-EN-P - February 2017
Support
• Link status detection, speed, duplex
• Layer 2 learning and forwarding
• STP, MSTP, RSTP, BPDU Guard
• VLAN, VTP, DTP, VLAN Table
• CDP, LLDP
• UDLD
• EtherChannel (LACP and PAgP)
• Flex links
• IGMP Snooping
• ARP
• REP ring convergence
• ARP
• Static routes
• Layer 3 host configuration
PoE is supported in Stack mode.
• Layer 2 unicast
• Layer 2 multicast and broadcast
• Layer 3 unicast traffic
• Layer 3 multicast and broadcast
Table 59 are not supported. Unsupported
Configure Switch Features Chapter 7
(Figure 25) or a linear
32648-M
32649-M
251