Allen-Bradley Stratix 5400 User Manual page 282

Chapter 7 Configure Switch Features
282
6. Click OK.
7. Click the Public to Private tab.
8. Click New Entry to display the New Entry dialog box.
9. Do one of the following:
• To translate one address for a device on the public subnet that
communicates on the private subnet, see
• To translate a range of addresses for devices on the public subnet that
communicates on the private subnet, see
• To translate a range of addresses for devices on the public subnet that
communicates on the private subnet,
Rockwell Automation Publication 1783-UM007G-EN-P - February 2017
Table 70.
Table 71.
seeTable 72.