Reconfigure An I/O Module - Allen-Bradley Logix5000 Reference Manual

Chapter 4 Input/Output Instructions (MSG, GSV, SSV, IOT)
174

Reconfigure an I/O Module

Use the Module Reconfigure message to send new configuration information to
an I/O module.
During the reconfiguration, the following occurs:
• Input modules continue to send input data to the controller.
• Output modules continue to control their output devices.
A Module Reconfigure message requires this configuration properties.
In this property
Message Type
Rockwell Automation Publication 1756-RM003N-EN-P - October 2011
Select
Module Reconfigure