Chapter 16
Math Conversion Instructions (DEG, RAD, TOD, FRD, TRN, TRUNC)
Description:
Arithmetic Status Flags:
Fault Conditions:
Condition
Prescan
Rung-condition-in is false
Rung-condition-in is true
Postscan
Condition
Prescan
Instruction first scan
Instruction first run
EnableIn is cleared
EnableIn is set
Postscan
568
The FRD instruction converts a BCD value (Source) to a decimal value and
stores the result in the Destination.
Arithmetic status flags are affected.
None
Execution:
Relay Ladder
Action
The rung-condition-out is set to false.
The rung-condition-out is set to false.
The controller converts the Source to a decimal value and places the result in the Destination.
The rung-condition-out is set to true.
The rung-condition-out is set to false.
Function Block
Action
No action taken.
No action taken.
No action taken.
EnableOut is cleared.
The instruction executes.
EnableOut is set.
No action taken.
Rockwell Automation Publication 1756-RM003N-EN-P - October 2011