Allen-Bradley Logix5000 Reference Manual page 185

Example
The I/O configuration of the controller has the
module that gets the message.
The I/O configuration of the controller has only
the local communication module.
The I/O configuration of the controller doesn't
have any of the modules that you need for the
message.
Rockwell Automation Publication 1756-RM003N-EN-P - October 2011
Click Browse and select the module.
Go to the local communication module.
Go out the EtherNet/IP port...
...to the address of 10.10.10.10.
Go across the backplane...
Go across the backplane...
...to the local communication module on slot 1
Go out the ControlNet port....
...to node 4
Go across the backplane...
...to the module in slot 0.
Input/Output Instructions (MSG, GSV, SSV, IOT)
...to the module in slot 0.
Chapter 4
185