Specify The Configuration Details - Allen-Bradley Logix5000 Reference Manual

Chapter 4 Input/Output Instructions (MSG, GSV, SSV, IOT)
Specify the Configuration
Details
If the target device is
Logix5000 controller
I/O module that you configure by using RSLogix
5000 software
PLC-5 controller
SLC controller
MicroLogix controller
Block-transfer module
172
After you enter the MSG instruction and specify the MESSAGE structure, use
the Message Configuration dialog box to specify the details of the message.
The details you configure depend on the message type you select.
Figure 3 - Message Configuration Tab
Rockwell Automation Publication 1756-RM003N-EN-P - October 2011
Click here to configure the MSG instruction
Select one of these message types
CIP Data Table Read
CIP Data Table Write
Module Reconfigure
CIP Generic
PLC5 Typed Read
PLC5 Typed Write
PLC5 Word Range Read
PLC5 Word Range Write
SLC Typed Read
SLC Typed Write
Block-Transfer Read
Block-Transfer Write
45634
Page
173
174
176
179
181
181