Allen-Bradley Logix5000 Reference Manual page 189

4. Choose a protocol from the Protocol box.
IMPORTANT
5. Enter the information on the System Protocol tab for each protocol
outlined below.
Topic
Protocol
Station Address
Transmit Retries
ACK Timeout
Reply Message Wait
Polling Mode
Error Detection
Duplicate Detection
Topic
Protocol
Station Address
Transmit Retries
Slave Poll Timeout
EOT Suppression
Error Detection
Duplicate Detection
Topic
Protocol
Station Address
Enable Store and Forward
Error Detection
6. Click OK.
Rockwell Automation Publication 1756-RM003N-EN-P - October 2011
Input/Output Instructions (MSG, GSV, SSV, IOT)
The Message Type box on the Message Configuration Tab
dialog box must be write-typed to be compatible with the
system protocol. Otherwise, the Broadcast button is
disabled.
Description
DF-1 Master
Type controller station address number
3
50
5
Choose from the following modes:
· 'Message Based' to poll the slave using
message instruction
· 'Slave can initiate message' for slave to
slave broadcast
· 'Standard' to have the schedule poll for
the slave
BCC
Enabled (checked)
Description
DF-1 Slave
Type controller station address number
3
3000
Disable (unchecked)
BCC
Enabled (checked)
Description
DF-1 Slave
Type controller station address number
Enable box (checkmark) to use store and forward
tag
BCC
Chapter 4
189