Addoninstructiondefintion Attributes; Controller Attributes - Allen-Bradley Logix5000 Reference Manual

Attribute Data Type
LastEditDate LINT
MajorRevision DINT
MinorRevision DINT
Name String
RevisionExtendedT String
ext
SafetySignature DINT
ID
SignatureID DINT
Vendor String
Attribute Data Type
Audit Value DINT[2], LINT
ChangesToDetect DINT[2], LINT
See Table 3
Table 5 - GSV/SSV Objects
SerialPort
Task
TimeSynchronization
WallClockTime

AddOnInstructionDefintion Attributes

The AddOnInstructionDefinition object lets you customize instructions for sets
of commonly-used logic, provides a common interface to this logic, and provides
documentation for the instruction.
For details, see the Logix5000 Controllers Add-On Instructions Programming
Manual, publication
Instruction Instruction
within within
Standard Safety Task
Task
GSV None
GSV None
GSV None
GSV GSV
GSV None
GSV None
GSV None
GSV None

Controller Attributes

The Controller object provides status information about controller execution.
Instruction Description
GSV The audit value is a unique value that is generated when a project is downloaded to the controller
or loaded from removable storage. When a change is detected, this value is updated.
To specify which changes are monitored, use the ChangesToDetect attribute.
Note: We recommend using the DINT[2] data type to avoid limitations when working with LINT
data types in Rockwell Automation controllers.
GSV, SSV Used to specify which changes are monitored. When a monitored change occurs, the Audit Value
is updated.
Note: We recommend using the DINT[2] data type to avoid limitations when working with LINT
data types in Rockwell Automation controllers.
Rockwell Automation Publication 1756-RM003N-EN-P - October 2011
Input/Output Instructions (MSG, GSV, SSV, IOT)
209
210
See the Integrated Architecture and CIP Sync
Configuration Application Technique, publication
IA-AT003.
211
1756-PM010.
Description
Date and time stamp of the last edit to an Add-On Instruction definition.
Major revision number of the Add-On Instruction.
Minor revision number of the Add-On Instruction.
Name of the Add-On Instruction.
Text describing the revision of the Add-On Instruction.
In a safety project, the ID number, date, and timestamp of an Add-On Instruction
definition.
32-bit identification number of an Add-On Instruction definition.
Vendor that created the Add-On Instruction.
Chapter 4
199