Add A Service - Redline RDL-3000 Installation Manuallines

RDL-3000

Add a Service

This step enables the subscriber to forward all Ethernet traffic received on the subscriber
Ethernet port.
Click Provisioning -> New Service in the web page main menu.
1.
Enter data for the following fields:
2.
Name: Service-1
3.
Tagging mode: Pass-through
4.
Use defaults for all other fields.
5.
Click Apply to activate this Service.
6.
Click Save All in the main menu to permanently save all changes to the provisioning
7.
configuration.
The system is now configured to transparently pass Ethernet traffic over the wireless
interface.
Note: If additional Links and Service Groups are added, it will be necessary to choose
the parent Link and parent Service Group when adding each new Service.
70-00159-01-06
INSTALLATION GUIDELINES
Proprietary Redline Communications © 2012 Page 54 of 65 kune 12, 2012