Customer Supplied Materials; Table 9: Materials - Customer-Supplied Items - Redline RDL-3000 Installation Manuallines

RDL-3000
4.2.2

Customer Supplied Materials

Installation of the RDL-3000 equipment requires additional equipment and materials
supplied by the customer and/or installer. The following list is provided as a guideline
only, and additional materials may be required based on local conditions at each
installation site. This list is not comprehensive and is provided as a guide only.
1 Equipment
Rack
2
120/240 VAC
Power
3
Cat-5 Ethernet
Cables
4
Cable
Installation
Materials
5 Radio/Antenna
Mast
6 Ground Block
7
Grounding
Wire
8 Tools
70-00159-01-06
INSTALLATION GUIDELINES

Table 9: Materials - Customer-Supplied Items

Mounting space allocated for the PoE power adapter. Must
accommodate 2 m (6') AC power cable and routing of Ethernet cable
from PoE to local Ethernet network access point.
Reliable 120/240 VAC. Total power requirements must be evaluated
based on individual site configurations.
Connect from PoE power adapter to core network.
Materials for securing cables to mast, protecting cables from abrasion,
etc. including suggested weatherproofing materials:
Scotch 2200 series of vinyl mastic rolls
Scotch 130C linerless rubber splicing tape
3M Scotch super 88 electrical tape
Rubber mastic putty or duct sealing putty
Mast or tower location as required by site survey. Equipment must be
rated for weight and wind loading of all installed radios and antennas.
Termination for grounding and shield of all conductive cables entering
the building.
Master grounding system for all indoor and outdoor equipment, with #2
AWG through #6 AWG as required and eye-terminals for connection to
RDL-3000 chassis and mounting bracket.
i) Precision set of screwdrivers, cutter pliers, and other common
installation tools.
ii) Portable computer (Windows™) for RDL-3000 configuration, antenna
alignment, and troubleshooting as required..
Proprietary Redline Communications © 2012 Page 25 of 65 kune 12, 2012