Mounting Kits; Lightweight Mounting Kit; Figure 16: Procedures - Lightweight Mounting Kit - Installed View - Redline RDL-3000 Installation Manuallines

RDL-3000
5.2

Mounting Kits

Redline offers a selection of mounting kits for the RDL-3000 system. Kit selection is
based on the antenna type, the method of mounting (e.g., mast or wall) and the mast
size if applicable. Assembly instructions for each mounting bracket are provided in this
section.
5.2.1

Lightweight Mounting Kit

The RDL-3000 lightweight mounting kit (3K-LW-MNT) general-purpose adapter allows
the RDL-3000 to be mounted on a mast pipe or flat surface. This bracket can be used
with Redline flat panel antennas that mount directly to the radio or with antennas that are
mounted separately (e.g., parabolic antenna).

Figure 16: Procedures - Lightweight Mounting Kit - Installed View

The lightweight installation kit includes:
Lightweight mounting kit includes mounting bracket with assembly hardware. Fits 25-
1.
105 mm (1.0-4.25 in) mast pipe or mounts on a flat surface.
Two 230 mm (9 in) RF jumper cables (N-type connectors, 50 Ohm)
2.
each mounting kit.
70-00159-01-06
INSTALLATION GUIDELINES
Proprietary Redline Communications © 2012
are included with
Page 30 of 65 kune 12, 2012