Table 10: Procedures - Lightweight Mounting Kit - Parts List; Figure 17: Procedures - Lightweight Mounting Kit - Bracket Arm - Redline RDL-3000 Installation Manuallines

RDL-3000
Use the following parts list and diagram to assemble the mounting bracket and attach
the RDL-3000 radio and antenna.
Assemble the lightweight mounting bracket. See the following assembly drawings.
1.
Attach the RDL-3000 unit directly to the antenna (if applicable).
2.
Attach the lightweight mounting bracket to the RDL-3000.
3.

Figure 17: Procedures - Lightweight Mounting Kit - Bracket Arm

Table 10: Procedures - Lightweight Mounting Kit - Parts List

Item
1
2
3
4
5
6
7
8
9
70-00159-01-06
INSTALLATION GUIDELINES
Qty Description
1
RDL-3000 Radio
1 Mount Bracket Arm Kit
1 Antenna*
4 Bolt 1/4-20 UNC X 3/4
4 Nut, 1/4-20 UNC
8 Washer, 1/4 flat
8 Washer, 1/4, split
2 228 mm (9 in) RF cables.
N-type connectors, 50 Ohm
2 Metal band clamps
* Item not included in the mounting bracket kit.
Proprietary Redline Communications © 2012
*
13.6 N-m (10 ft-lb.)
13.6 N-m (10 ft-lb.)
1.4 N-m (1 ft-lb)
Page
Torque
31 of 65 kune 12, 2012