Materials; Redline System Components; Table 8: Materials - Redline System Components; Figure 11: Materials - Redline System Components - Redline RDL-3000 Installation Manuallines

RDL-3000
4.2

Materials

4.2.1

Redline System Components

1 RDL-3000 radio. Model T502 (4.940 - 4.850 GHz)
Lightweight mounting kit includes mounting bracket with assembly hardware (assembly
2
required). Fits 25-105 mm (1.0-4.25 in) mast pipe or mounts on a flat surface. Two 230
mm (9 in) RF jumper cables (N-type connectors, 50 Ohm)
mounting kit.
3
Heavy-duty mounting kit includes mounting bracket with assembly hardware (assembly
required). Fits 45-110 mm (1.75-4.5 in) mast. Two 400 mm (16 in) RF jumper cables (N-
type connectors, 50 Ohm)
4 Antenna Sector controller sector antenna (wide beamwidth).
5 Subscriber antenna (narrow beamwidth).
6 Ethernet cable line protection (LP) unit.
7
Cat-5e shielded outdoor Ethernet cable terminated with RJ-45 connector each end.
Connect from radio to PoE and from PoE to local area network (91 m (300 ft) max.).
8 GPS Antenna with mounting bracket, and 6 m
9 Synchronization cable and T-connector. Cable is 6 m (19.5 ft) with TNC/M connectors.
10 AC: single AC 110/220 VAC auto-detect
DC: single DC 20-60 VDC auto detect
10/100Base-T Ethernet with one standard data port and one powered (48 VDC) data port.
11 The PoE power cord must be ordered separately (AC type only). Available terminated as
NA, EU, or UK type.
Note: All items must be specified individually as part of each system order.
70-00159-01-06
INSTALLATION GUIDELINES

Figure 11: Materials - Redline System Components

Table 8: Materials - Redline System Components

are included with each mounting kit.
Proprietary Redline Communications © 2012
are included with each
(19.5 ft) antenna cable.
Page 24 of 65 kune 12, 2012