Interface Ports; Ethernet Port; Gps Antenna Port (Rdl-3000-G); Figure 2: Features: System Components - Redline RDL-3000 Installation Manuallines

RDL-3000 INSTALLATION GUIDELINES

Figure 2: Features: System Components

3.3

Interface Ports

Ethernet Port

The Ethernet port (RJ-45 / F connector) receives DC power and provides Ethernet
connectivity with the local network. The Ethernet port connects to the PoE adapter using
a weatherproof CAT-5e Ethernet cable.
Note: The PoE does not amplify the Ethernet signal. The maximum total length of the
Ethernet cable is 91.5 m (300 ft). For example, 90 m (295 ft) from the RDL-3000 to the
PoE and 1.5 m (5 ft) from the PoE to the local network equipment.

GPS Antenna Port (RDL-3000-G)

The GPS antenna port (TNC / F connector) conducts RF signals between the RDL-3000
and the antenna system (ordered separately). This port is provided only on units factory-
equipped with GPS hardware. The GPS antenna can be located remotely from the RDL-
3000 unit by using up to 46 m (~150 ft) of high quality antenna cable. The GPS module
does not set the RDL-3000 internal date/time clock.

Figure 3: Features - RDL-3000-G with GPS Antenna, Sync, and Ethernet Ports

70-00159-01-06 Proprietary Redline Communications © 2012 Page 17 of 65 kune 12, 2012