Heavy-Duty Mounting Kit; Figure 19: Procedures - Lightweight Mounting Kit - Alternate Mounting Methods; Figure 20: Procedures - Heavy-Duty Mounting Kit - Redline RDL-3000 Installation Manuallines

RDL-3000

Figure 19: Procedures - Lightweight Mounting Kit - Alternate Mounting Methods

5.2.2

Heavy-Duty Mounting Kit

The RDL-3000 heavy-duty system provides a 4-point system for increased reliability.
The heavy-duty bracket may be used with 300 mm (12 in), 600 mm (24 in) square
antennas, or rectangular sector antennas where the RDL-3000 is installed on towers or
similar locations.
The heavy-duty installation kit includes:
Heavy-duty mounting kit includes mounting bracket with assembly hardware.
1.
Fits 45 - 110 mm (1.75 - 4.5 in) mast.
Adapter bracket attaches the RDL-3000 to the heavy-duty mounting bracket.
2.
Two 400 mm (16 in) RF jumper cables (N-type connectors, 50 Ohm).
3.
70-00159-01-06
INSTALLATION GUIDELINES

Figure 20: Procedures - Heavy-Duty Mounting Kit

Proprietary Redline Communications © 2012 Page 33 of 65 kune 12, 2012