Weatherproofing The Ethernet Port; Figure 30: Procedures - Ethernet Port - Weatherproofing Pt-1; Figure 31: Procedures - Ethernet Port - Weatherproofing Pt-2 - Redline RDL-3000 Installation Manuallines

RDL-3000

Weatherproofing the Ethernet Port

While the Ethernet connection is weatherproof, it is always advisable to provide
additional weatherproofing as follows:
Work mastic putty well into the end of the nut covering the Ethernet port. This
1.
provides strain-relief and an regular surface for applying weatherproofing tape.
Wrap the splicing tape over the connector and cable. Start as close as possible to
2.
the RDL-3000 body. Stretch and wind the tape back along the Ethernet port nut,
ensuring there are no gaps in the tape.
70-00159-01-06
INSTALLATION GUIDELINES

Figure 30: Procedures - Ethernet Port - Weatherproofing Pt-1

Figure 31: Procedures - Ethernet Port - Weatherproofing Pt-2

Proprietary Redline Communications © 2012 Page 41 of 65 kune 12, 2012