Figure 33: Procedures - Ethernet Line Protector - Wiring Diagram; Figure 34: Procedures - Ethernet Line Protector - Identifying Terminal Connectors - Redline RDL-3000 Installation Manuallines

RDL-3000 INSTALLATION GUIDELINES
4. Outdoor Units:
Ensure all conduit fittings are correctly torqued and have O-rings to ensure
environmental seal.
For correct operation, it is very important that the line protector is
properly connected to a low impedance (low R and low L) ground system.

Figure 33: Procedures - Ethernet Line Protector - Wiring Diagram

Figure 34: Procedures - Ethernet Line Protector - Identifying Terminal Connectors

Note: Terminal block assignment is identical for both screw-type and 110Connect.
70-00159-01-06 Proprietary Redline Communications © 2012 Page 43 of 65 kune 12, 2012