Telnet Access; Web Browser; Step 2: Restore Default Settings; Factory Reset - Redline RDL-3000 Installation Manuallines

RDL-3000

Telnet Access

Use the following steps to establish a Telnet session with the RDL-3000.
On the PC, open a Telnet client and enter the unit IP address. The RDL-3000 factory
1.
default IP is '192.168.25.2'.
Login to the RDL-3000 using the assigned username and password. The default
2.
username is 'admin', and the default password is 'admin'.
For example,
telnet 192.168.25.2
username: admin
password: *****

Web Browser

Use the following steps to establish a Web session with the RDL-3000.
On the PC, open a browser and enter the unit RDL-3000 IP address in the browser
1.
address bar. The factory default IP address is 192.168.25.2.
Login to the RDL-3000 using the assigned username and password. The default
2.
username is 'admin', and the default password is 'admin'.
5.5.2

Step 2: Restore Default Settings

When first deploying an RDL-3000, it is recommended to perform a factory reset to
initialize the system parameters.

Factory Reset

Web:
1. Login to the RDL-3000 Web interface
2. Click Configuration->Factory Defaults
Telnet:
1. Login to the RDL-3000 Telnet interface
2. Enter the command:
save defaultconfig
70-00159-01-06
INSTALLATION GUIDELINES

Figure 41: Procedures - Configuration - Login Screen

Proprietary Redline Communications © 2012 Page 48 of 65 kune 12, 2012