Configuring Aaa Privilege Level Authorization Methods - Cisco SCE8000 Configuration Manual

Chapter 5 Configuring the Management Interface and Security
Options
The following options are available:
•
How to Specify the Login Authentication Methods
From the SCE(config)# prompt, type aaa authentication login default method1 [method2...] and
Step 1
press Enter.
You may list a maximum of four methods; all four methods explained above. List them in the order of
priority.
How to Delete the Login Authentication Methods List
Step 1 From the SCE(config)# prompt, type no aaa authentication login default and press Enter.
If the login authentication methods list is deleted, the default login authentication method only (enable
password) will be used. TACACS+ authentication will not be used.

Configuring AAA Privilege Level Authorization Methods

•
•
•
Options
The following options are available:
•
OL-16479-01
method — the login authentication methods to be used. You may specify up to four different
methods, in the order in which they are to be used.
– group TACACS+ — Use TACACS+ authentication.
local — Use the local username database for authentication
–
enable (default) — Use the " enable " password for authentication
–
none — Use no authentication.
–
Options, page 5-17
How to Specify AAA Privilege Level Authorization Methods, page 5-18
How to Delete the AAA Privilege Level Authorization Methods List, page 5-18
method — the login authorization methods to be used. You may specify up to four different
methods, in the order in which they are to be used.
group TACACS+ — Use TACACS+ authorization.
–
local — Use the local username database for authorization
–
enable (default) — Use the " enable " password for authorization
–
none — Use no authorization.
–
Configuring the Available Interfaces
Cisco SCE8000 Software Configuration Guide, Rel 3.1.6S
5-17