Cisco SCE8000 Configuration Manual page 83

Chapter 5 Configuring the Management Interface and Security
How to Add a User with a Privilege Level and an MD5 Encrypted Password Entered in Clear Text,
•
page 5-15
• How to Add a User with a Privilege Level and an MD5 Encrypted Password Entered as an MD5
Encrypted String, page 5-15
Options
The following options are available:
name — name of the user whose privilege level is set
•
level — the privilege level permitted to the specified user. These levels correspond to the CLI
•
authorization levels, which are entered via the enable command:
–
–
–
password — a clear text password. May be saved in the local list in either of two formats:
•
–
–
encrypted-secret — an MD5 encryption string password
•
The following keywords are available:
secret — the password is saved in MD5 encrypted form. Use with either of the following keywords
•
to indicate the format of the password as entered in the command:
–
–
How to Add a User with a Privilege Level and a Clear Text Password
From the SCE(config)# prompt, type
Step 1
Enter.
How to Add a User with a Privilege Level and an MD5 Encrypted Password Entered in Clear Text
From the SCE(config)# prompt, type username name privilege level secret 0 password and press
Step 1
Enter.
How to Add a User with a Privilege Level and an MD5 Encrypted Password Entered as an MD5 Encrypted String
Step 1 From the SCE(config)# prompt, type username name privilege level secret 5 encrypted-secret and
press Enter.
OL-16479-01
0 — User
10 — Admin
15 (default) — Root
as clear text I
n MD5 encrypted form if the secret keyword is used
0 — use with the password option to specify a clear text password that will be saved in MD5
encrypted form
5 = use with the encrypted-secret option to specify an MD5 encryption string that will be saved
as the user MD5-encrypted secret password
name
username privilege
Cisco SCE8000 Software Configuration Guide, Rel 3.1.6S
Configuring the Available Interfaces
level password and press
password
5-15