Keyboard Shortcuts - Cisco SCE8000 Configuration Manual

Navigational and Shortcut Features
To use the history functions, use the keys shown in the following table.
Table 2-3
Arrow
Up arrow
Down arrow

Keyboard Shortcuts

The SCE platform has several keyboard shortcuts that make it easier to navigate and use the system. The
following table shows the keyboard shortcuts available.
You can get a display the keyboard shortcuts at any time by typing help bindings.
Table 2-4
Description
Navigational shortcuts
Move cursor one character to the right.
Move cursor one character to the left.
Move cursor one word to the right (forward).
Move cursor one word to the left (backward).
Move cursor to the start of the line.
Move cursor to the end of the line.
Editing shortcuts
Delete the character where the cursor is located.
Delete from the cursor position to the end of the word.
Delete the character before the current location of the cursor.
Delete the character before the current location of the cursor.
Deletes from the cursor position to the end of the line
Deletes all characters from the cursor to the beginning of the line
Delete the word to the left of the cursor.
Recall the last item deleted.
Completes the word when there is only one possible completion.
Completes the word when there is only one possible completion. (Same
functionality as <Tab>.)
Cisco SCE8000 Software Configuration Guide, Rel 3.1.6S
2-8
Keyboard Shortcuts for History Functions
Shortcut Description
Ctrl-P Move cursor to the previous command with the same prefix.
Ctrl-N Moves the cursor to the next command with the same prefix
as original.
Ctrl-L Re-display the current command line.
Ctrl-R
Keyboard Shortcuts
Chapter 2 Command Line Interface
Shortcut key
CTRL-F /->
CTRL-B /<-
ESC-F
ESC-B
CTRL-A
CTRL-E
CTRL-D
ESC-d
Backspace
CTRL-H
CTRL-K
CTRL-U
CTRL-W
CTRL-Y
<Tab>
CTRL-I
OL-16479-01