Examples For Displaying The Sce Platform Inventory; Displaying The Sce Platform Inventory: Frus Only - Cisco SCE8000 Configuration Manual

Chapter 3 Basic Cisco SCE8000 Platform Operations
•
The show inventory CLI commands display the following information:
•
•
•
•
•
From the SCE> prompt, type show inventory [raw] and press Enter.
Step 1

Examples for Displaying the SCE Platform Inventory

•
•

Displaying the SCE Platform Inventory: FRUs Only

The following example shows how to display the inventory (UDIs) for the FRUs only.
SCE>show inventory
NAME: "SCE8000 Chassis", DESCR: "CISCO7604"
PID: CISCO7604
NAME: "SCE8000 Service Control Module (SCM) in slot 1", DESCR: "SCE8000-SCM-E"
PID: SCE8000-SCM-E
NAME: "SCE8000 SPA Interface Processor (SIP) in slot 3", DESCR: "SCE8000-SIP"
PID: SCE8000-SIP
NAME: "SPA-1X10GE-L-V2", DESCR: "SPA-1X10GE-L-V2"
PID: SPA-1X10GE-L-V2
NAME: "SPA-1X10GE-L-V2", DESCR: "SPA-1X10GE-L-V2"
PID: SPA-1X10GE-L-V2
NAME: "SPA-1X10GE-L-V2", DESCR: "SPA-1X10GE-L-V2"
PID: SPA-1X10GE-L-V2
NAME: "SPA-1X10GE-L-V2", DESCR: "SPA-1X10GE-L-V2"
PID: SPA-1X10GE-L-V2
NAME: "SCE8000 FAN 1", DESCR: "FAN-MOD-4HS"
PID: FAN-MOD-4HS
NAME: "SCE8000 AC or DC power supply 0", DESCR: "PWR-2700-AC/4"
PID: PWR-2700-AC/4
NAME: "SCE8000 AC or DC power supply 1", DESCR: "PWR-2700-AC/4"
PID: PWR-2700-AC/4
NAME: "XFP-10GLR-OC192SR ", DESCR: "XFP-10GLR-OC192SR "
PID: XFP-10GLR-OC192SR , VID: V02, SN: AGA1142N4B7
OL-16479-01
CLI show inventory raw command.
This command displays all UDIs on the Cisco SCE8000 platform.
Device name
Description
Product identifier
Version identifier
Serial number
Displaying the SCE Platform Inventory: FRUs Only, page 3-11
Displaying the Complete SCE Platform Inventory, page 3-12
, VID: V0 , SN: FOX105108X5
, VID: V0 , SN: CAT1122584N
, VID: V0 , SN: CAT1150G07F
, VID: V02, SN: JAE11517RMR
, VID: V02, SN: JAE11496E1P
, VID: V02, SN: JAE11517RIO
, VID: V02, SN: JAE115295HH
, VID: V0 , SN: DCH11013744
, VID: V0 , SN: APQ105000MV
, VID: V0 , SN: APQ105000MV
How to Display the SCE Platform Inventory
Cisco SCE8000 Software Configuration Guide
3-11