Options; How To Import Subscriber Information; How To Export Subscriber Information; How To Import A Subscriber Template - Cisco SCE8000 Configuration Manual

Importing and Export ingSubscriber Information
•
•
•
•
These subscriber management commands are LineCard interface commands. Make sure that you are in
LineCard Interface command mode.

Options

The following option is available:
•

How to Import Subscriber Information

From the SCE(config if)# prompt, type subscriber import csv-file filename and press Enter.
Step 1
Imports the subscriber information from the specified file.
Imported subscriber information is added to the existing subscriber information. It does not overwrite
the existing data.
If the information in the imported file is not valid, the command will fail during the verification process
before it is actually applied.

How to Export Subscriber Information

From the SCE(config if)# prompt, type subscriber export csv-file filename and press Enter.
Step 1
Exports the subscriber information to the specified file.

How to Import a Subscriber Template

From the SCE(config if)# prompt, type subscriber template import csv-file filename and press Enter.
Step 1
Imports the subscriber template from the specified file.
Cisco SCE8000 Software Configuration Guide, Rel 3.1.6S
9-6
subscriber anonymous-group import csv-file
subscriber anonymous-group export csv-file
subscriber template import csv-file
subscriber template export csv-file
filename — the name of the csv file.
Chapter 9 Managing Subscribers
OL-16479-01