How To Remove All Introduced Subscribers; How To Remove A Specific Anonymous Subscriber; Options; How To Remove All Anonymous Subscriber Groups - Cisco SCE8000 Configuration Manual
Service control engine
Hide thumbs
Also See for SCE8000:
- Installation and configuration manual (248 pages) ,
- Installation manual (51 pages) ,
- Removal and replacement procedures (36 pages)
Table of Contents
Advertisement
Removing Subscribers and Templates
How to Remove All Introduced Subscribers
From the SCE(config if)# prompt, type no subscriber all and press Enter.
Step 1
Removes all introduced subscribers.
How to Remove a Specific Anonymous Subscriber
Options
The following option is available:
•
From the SCE(config if)# prompt, type no subscriber anonymous-group name group-name and press
Step 1
Enter.
Removes the specified anonymous subscriber group.
How to Remove All Anonymous Subscriber Groups
From the SCE(config if)# prompt, type no subscriber anonymous-group all and press Enter.
Step 1
Removes all anonymous subscriber groups.
How to Remove All Anonymous Subscribers
From the SCE# prompt, type clear interface linecard 0 subscriber anonymous all and press Enter.
Step 1
Removes all anonymous subscribers.
The clear subscriber anonymous command is a Privileged Exec command.
Note
Cisco SCE8000 Software Configuration Guide, Rel 3.1.6S
9-8
group-name — the name of the anonymous subscriber group to be removed
Chapter 9
Managing Subscribers
OL-16479-01
Advertisement
Table of Contents
