Ip Advertising - Cisco SCE8000 Configuration Manual

Chapter 5 Configuring the Management Interface and Security
Displaying the Entire IP Routing Table: Example
This example shows how to display the routing table.
SCE#show ip route
gateway of last resort is
|
|-----------------|------------------|-----------------|
|
|
|
|
How to Display the IP Routing Table for a Specified Subnet
Options
The following options are available:
•
•
From the SCE# prompt, type show ip route prefix mask and press Enter.
Step 1
Displays the routing table for the specified subnet (prefix/mask).
Displaying the IP Routing Table for a Specified Subnet: Example
This example shows how to display the routing table for a specified subnet.
SCE#show ip route 10.1.60.0 255.255.255.0
|
|-----------------|-----------------|-----------------|
|
sce#

IP Advertising

•
•
IP advertising is the act of periodically sending ping requests to a configured address at configured
intervals. This maintains the SCE platform IP/MAC addresses in the memory of adaptive network
elements, such as switches, even during a long period of inactivity.
The following commands are relevant to IP advertising:
•
•
•
•
•
OL-16479-01
prefix | mask
10.2.0.0 | 255.255.0.0
10.3.0.0 | 255.255.0.0
198.0.0.0 |
10.1.60.0 | 255.255.255.0 |
prefix — IP address of the routing entry, in dotted notation.
mask — The relevant subnet mask, in dotted notation
prefix | mask
10.1.60.0 | 255.255.255.0 |
Configuring IP Advertising, page 5-36
How to Display the Current IP Advertising Configuration, page 5-37
[no] ip advertising
ip advertising destination
ip advertising interval
default ip advertising destination
default ip advertising interval
10.1.1.1
| next hop
| 10.1.1.250 |
| 10.1.1.253 |
255.0.0.0 | 10.1.1.251 |
10.1.1.5
| next hop
10.1.1.5 |
Cisco SCE8000 Software Configuration Guide, Rel 3.1.6S
IP Configuration
|
|
|
5-35