Cisco SCE8000 Configuration Manual page 129

Chapter 6 Configuring the Line Interface
How to View a Specified Traffic Counter
From the SCE# prompt, type show interface linecard 0 traffic-counter name counter-name and press
Step 1
Enter.
Displays the value of the specified counter and lists the traffic rules that use it.
Viewing a Traffic Counter: Example
The following example displays information for the traffic counter "cnt".
SCE# show interface linecard 0 traffic-counter name cnt
Counter 'cnt' value: 0 packets. Rules using it: None.
How to View all Traffic Counters
From the SCE# prompt, type show interface linecard 0 traffic-counter all and press Enter.
Step 1
Displays the value of the each counter and lists the traffic rules that use it.
Viewing the Traffic Counters: Example
The following example displays information for all existing traffic counters.
SCE# show interface linecard 0 traffic-counter all
Counter 'cnt' value: 0 packets. Rules using it: None.
Counter 'cnt2' value: 0 packets. Rules using it: Rule2.
2 counters listed out of 32 available.
How to Reset a Specified Traffic Counter
From the SCE# prompt, type clear interface linecard 0 traffic-counter name counter-name and press
Step 1
Enter.
Resets the specified traffic counter.
How to Reset all Traffic Counters
Step 1 From the SCE# prompt, type clear interface linecard 0 traffic-counter all and press Enter.
Resets all traffic counters.
OL-16479-02
Configuring Traffic Rules and Counters
Cisco SCE8000 Software Configuration Guide
6-15