How To Disable Aging For Introduced Subscribers; How To Set The Aging Timeout Period For Anonymous Group Subscribers; Options; How To Set The Aging Timeout Period For Introduced Subscribers - Cisco SCE8000 Configuration Manual
Service control engine
Hide thumbs
Also See for SCE8000:
- Installation and configuration manual (248 pages) ,
- Installation manual (51 pages) ,
- Removal and replacement procedures (36 pages)
Table of Contents
Advertisement
Configuring Subscriber Aging
How to Disable Aging for Introduced Subscribers
From the SCE(config if)# prompt, type no subscriber aging introduced and press Enter.
Step 1
How to Set the Aging Timeout Period for Anonymous Group Subscribers
Options
The following option is available:
•
From the SCE(config if)# prompt, type no subscriber aging anonymous timeout aging-time and press
Step 1
Enter.
How to Set the Aging Timeout Period for Introduced Subscribers
Options
The following option is available:
•
From the SCE(config if)# prompt, type no subscriber aging introduced timeout aging-time and press
Step 1
Enter.
How to Display Aging for Anonymous Group Subscribers
From the SCE> prompt, type show interface linecard 0 subscriber aging anonymous and press Enter.
Step 1
How to Display Aging for Introduced Subscribers
From the SCE> prompt, type show interface linecard 0 subscriber aging introduced and press Enter.
Step 1
Cisco SCE8000 Software Configuration Guide, Rel 3.1.6S
9-22
aging-time — the time interval, in minutes, after which an inactive subscriber sill be aged.
aging-time — the time interval, in minutes, after which an inactive subscriber will be aged.
Chapter 9
Managing Subscribers
OL-16479-01
Advertisement
Table of Contents
