Chapter 9
Managing Subscribers
Displaying Anonymous Subscriber Information
•
•
•
•
•
•
•
You can display the following information regarding the anonymous subscriber groups:
•
•
•
•
•
Use the following commands to display anonymous subscriber information:
•
•
•
•
How to display currently configured anonymous groups
Step 1
From the SCE> prompt, type show interface linecard 0 subscriber anonymous-group all and press
Enter.
How to display currently configured templates for anonymous groups
From the SCE> prompt, type show interface linecard 0 subscriber templates and press Enter.
Step 1
OL-16479-01
How to display currently configured anonymous groups, page 9-19
How to display currently configured templates for anonymous groups, page 9-19
How to display current configuration for a specified anonymous group, page 9-20
How to display subscribers in a specified anonymous group, page 9-20
How to display all subscribers currently in anonymous groups, page 9-20
How to display the number of subscribers in a specified anonymous group, page 9-20
How to display the total number of subscribers in all anonymous groups, page 9-20
aging (see
How to Display Aging for Anonymous Group Subscribers, page
currently configured anonymous groups
currently configured subscriber templates
configuration of a specified anonymous group
number of subscribers in a specified anonymous group, or in all anonymous groups
show interface linecard 0 subscriber templates [index]
show interface linecard 0 subscriber anonymous-group [all] [name 'groupname']
show interface linecard 0 subscriber amount anonymous [name 'groupname']
show interface linecard 0 subscriber anonymous [name 'groupname']
Cisco SCE8000 Software Configuration Guide, Rel 3.1.6S
Monitoring Subscribers
9-22)
9-19