Chapter 9
Managing Subscribers
How to display the number of subscribers with no mapping
Step 1
From the SCE> prompt, type show interface linecard 0 subscriber amount mapping none and press
Enter.
How to Display Subscriber Information
•
•
•
•
•
You can display the following information about a specified subscriber:
•
•
•
Use the following commands to display subscriber information:
•
•
•
•
•
How to display a listing of subscriber properties
From the SCE> prompt, type show interface linecard 0 subscriber properties and press Enter.
Step 1
How to display complete information for a specified subscriber
Use this command to display complete information for a specified subscriber, including all values of
subscriber properties and mappings.
OL-16479-01
How to display a listing of subscriber properties, page 9-17
How to display complete information for a specified subscriber, page 9-17
How to display values of subscriber properties for a specified subscriber, page 9-18
How to display mappings for a specified subscriber, page 9-18
How to display OS counters for a specified subscriber, page 9-18
values of the various subscriber properties
mappings (IP address or VLAN-ID)
OS counters:
current number of flows
–
bandwidth
–
show interface linecard 0 subscriber properties
show interface linecard 0 subscriber name 'name'
show interface linecard 0 subscriber name 'name' mappings
show interface linecard 0 subscriber name 'name' counters
show interface linecard 0 subscriber name 'name' properties
Cisco SCE8000 Software Configuration Guide, Rel 3.1.6S
Monitoring Subscribers
9-17