Chapter - Cisco XR 12000 Reference
Cisco ios xr advanced system command reference
Hide thumbs
Also See for XR 12000:
- Command reference manual (359 pages) ,
- Configuration manual (178 pages) ,
- Getting started manual (176 pages)
Table of Contents
Advertisement
Troubleshooting Commands
This module describes commands used for troubleshooting routers running Cisco IOS XR software.
The commands in this chapter with the cisco-support task ID are used in the Cisco IOS XR Troubleshooting
Guide for Cisco XR 12000 Series Router as part of the troubleshooting process. For information about
commands with the cisco-support task ID that are not documented in this chapter, please contact
Cisco Technical Support.
These Cisco support commands are normally reserved for use by Cisco Technical Support personnel only.
Caution
There is some risk that they may cause performance or other issues that impact products without proper
usage, and we highly recommend that you contact Cisco Technical Support prior to using any of these
commands.
•
show arp trace , page 39
•
show captured packets, page 43
•
show cfgmgr trace , page 45
•
show im database, page 47
•
show imds interface brief , page 51
•
show netio chains, page 53
•
show netio clients, page 56
•
show netio db, page 58
•
show netio idb , page 60
•
show netio media-registrations, page 65
•
show netio subblock, page 67
•
show netio trace, page 70
•
show sysdb connections, page 73
•
show sysdb trace verification location , page 75
•
show sysdb trace verification shared-plane , page 78
OL-30353-01
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x
37
Advertisement
Table of Contents
