Cisco XR 12000 Reference page 262

show tech-support mpls optical-uni
Command Modes
EXEC
Command History
Release
Release 3.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
This command can generate a very large amount of output. You may want to redirect the output to a file
Tip
using the file send-to keyword and argument. Redirecting the output to a file also makes sending the
output to your Cisco Technical Support representative easier.
This command generates O-UNI debugging information that can be useful for Cisco Technical Support
representatives when troubleshooting a router. See 'Obtaining Documentation and Submitting a Service
Request' section on page iii in the Preface for Cisco Technical Support contact information.
This command is not required during normal use of the router.
Note
See the Cisco IOS XR software command references for information about these commands and descriptions
of their command output. The Cisco IOS XR software command references are located at the following URL:
http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html
Task ID
Task ID
cisco-support
ouni
Examples The following example shows some of the show tech-support mpls optical-uni command output that is
displayed for the terminal:
RP/0/0/CPU0:router# show tech-support mpls optical-uni terminal page
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x
254
show tech-support mpls optical-uni (Detail with Event traces)
Modification
This command was introduced.
Operations
read
read
Tech-Support Commands
OL-30353-01