Cisco XR 12000 Reference page 272

show tech-support mpls traffic-eng
page
tunnel-number
number
Command Modes
EXEC
Command History
Release
Release 3.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
This command can generate a very large amount of output. You may want to redirect the output to a file
Tip
using the file send-to keyword and argument. Redirecting the output to a file also makes sending the
output to your Cisco Technical Support representative easier.
This command generates MPLS-TE information that can be useful for Cisco Technical Support representatives
when troubleshooting a router. See 'Obtaining Documentation and Submitting a Service Request' section on
page iii in the Preface for Cisco Technical Support contact information.
This command is not required during normal use of the router.
Note
See the Cisco IOS XR Software command references for information about these commands and descriptions
of their command output. The Cisco IOS XR Software command references are located at the following URL:
http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html
Task ID
Task ID
cisco-support
mpls-te
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x
264
(Optional) Specifies that the command output is displayed one page at a time.
Use the return key to display the next line of output or use the space bar to
display the next page of information. If not used, the output scrolls (that is, it
does not stop for page breaks).
Press the Ctrl+C keys to stop the command output.
(Optional) Specifies the tunnel number that is used by the RSVP process.
(Optional) Number for the tunnel. The range is from 0 to 65535.
Modification
This command was introduced.
Tech-Support Commands
Operations
read
read
OL-30353-01