Cisco XR 12000 Reference page 371

Tech-Support Commands
rack
location
node-id
Command Modes
EXEC
Command History
Release
Release 3.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
This command can generate a very large amount of output. You may want to redirect the output to a file
Tip
using the file send-to keyword and argument. Redirecting the output to a file also makes sending the
output to your Cisco Technical Support representative easier.
The SysDB is the memory database that is used to store configuration and statistical data with some IPC data.
This command generates SysDB information that relates to debugging information that can be useful for Cisco
Technical Support representatives when troubleshooting a router. See 'Obtaining Documentation and Submitting
a Service Request' section on page iii in the Preface for Cisco Technical Support contact information.
This command is not required during normal use of the router.
Note
See the Cisco IOS XR software command references for information about these commands and descriptions
of their command output. The Cisco IOS XR software command references are located at the following URL:
http://www.cisco.com/en/US/products/ps5845/prod_command_reference_list.html
Task ID
Task ID
cisco-support
OL-30353-01
(Optional) Displays the list of racks.
(Optional) Specifies a node.
(Optional). Node ID. The node-id argument is entered in the rack/slot/module
notation.
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x
Modification
This command was introduced.
Operations
read
show tech-support sysdb
363