Show Netio Media-Registrations - Cisco XR 12000 Reference

Troubleshooting Commands

show netio media-registrations

To display Network Input and Output (Netio) protocol registrations for media changes, use the show netio
media-registrations command in EXEC mode.
show netio media-registrations[location node-id]
Syntax Description
location node-id
Command Default
No default behavior or values.
Command Modes
EXEC
Command History
Release
Release 3.8.0
Release 3.9.0
Release 4.0.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
cisco-support
Examples
The following example shows the output of the show netio media-registrations command:
RP/0/0/CPU0:router# show netio media-registrations location 0/2/0
Registrations by L3 for media (change/upgrade) changes
L3 Protocol
--------------------------------------------
clns
OL-30353-01
(Optional) Displays Netio protocol registrations for media changes for a specified
node. The node-id argument is entered in the rack/slot/module notation.
Callback L2 Media
0x795f978c atm_mux_vc
atm_nlpid_vc
atm_snap_vc
atm_sub
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x
show netio media-registrations
Modification
This command was introduced.
No modifications.
No modifications.
Operation
read
65