Watchdog Threshold Memory - Cisco XR 12000 Reference

Troubleshooting Commands

watchdog threshold memory

To configure the value of memory available for each alarm threshold, use the watchdog threshold memory
command in global configuration or interface configuration mode. To revert to the default threshold memory,
use the no form of this command.
watchdog memory threshold [location node-id] minor percentage-memory-available severe
percentage-memory-available critical percentage-memory-available
no watchdog memory threshold [location node-id] minor percentage-memory-available severe
percentage-memory-available critical percentage-memory-available
Syntax Description
location node-id
minor
percentage-memory- available
severe
critical
Command Default
None
Command Modes
Global configuration
Interface configuration
Command History
Release
Release 3.4.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Use the watchdog threshold memory command to configure the memory thresholds. Threshold values can
be applied to all nodes or a specific node using the location node-id keyword and argument. If the local
threshold settings are removed, the local settings return to those set globally. In addition, you can view default
and configured thresholds.
This table lists the recommended memory threshold value calculations if the minor threshold is set to 20
percent, the severe threshold is set to 10 percent, and the critical threshold is set to 5 percent.
OL-30353-01
Configures the threshold memory for a specified node. The node-id
argument is entered in the rack/slot/module notation.
Specifies the threshold for the minor state.
Memory consumption percentage. Range is from 5 to 40.
Specifies the threshold for the severe state.
Specifies the threshold for the critical state.
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x
Modification
This command was introduced.
watchdog threshold memory
91