Show Tech-Support Install - Cisco XR 12000 Reference

Tech-Support Commands

show tech-support install

To automatically run show commands that display information specific to installation information, use the
show tech-support install command in the EXEC and administration EXEC modes.
show tech-support install [page | file send-to] [location node-id] [rack]
Syntax Description
page
file
send-to
location
node-id
rack
Command Default
Output is logged to the terminal screen.
OL-30353-01
(Optional) Displays the command output on a single page at a time. Use the Return
key to display the next line of output or use the space bar to display the next page of
information. If not used, the output scrolls (that is, it does not stop for page breaks).
(Optional) Specifies that the command output is saved to a specified file.
(Optional) Name of the file. The following valid options are listed:
• filename
• bootflash: filename
• compactflash: filename
• disk0: filename
• disk1: filename
• flash: filename
• ftp: filename
• harddisk: filename
• harddiska: filename
• nvram: filename
• rcp: filename
• slot0: filename
• slot1: filename
• tftp: filename
(Optional) Specifies a node.
(Optional) Node ID. The node-id argument is entered in the rack/slot/module
notation.
(Optional) Displays the list of racks.
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x
show tech-support install
223