Cisco XR 12000 Reference page 160
Cisco ios xr advanced system command reference
Hide thumbs
Also See for XR 12000:
- Command reference manual (359 pages) ,
- Configuration manual (178 pages) ,
- Getting started manual (176 pages)
Table of Contents
Advertisement
show tech-support bcdl
uncompressed
Command Default
The command output is not compressed.
Command Modes
EXEC
Command History
Release
Release 3.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Tip
This command can generate a very large amount of output. You may want to redirect the output to a file
using the file send-to keyword and argument. Redirecting the output to a file also makes sending the
output to your Cisco Technical Support representative easier.
Use the show tech-support bcdl command to run show commands that display information specific to
BCDL debugging. The BCDL is used to pass routing information from the Routing Information Base (RIB)
to the linecards for Forwarding Information Base (FIB) processing. BCDL also allows Multiprotocol Label
Switching (MPLS) to send label information to the FIB and allows Local Packet Transport Services (LPTS)
to send information to the linecard processes. This command generates BCDL debugging information that
can be useful for Cisco Technical Support representatives when troubleshooting a router. See 'Obtaining
Documentation and Submitting a Service Request' section on page iii in the Preface for Cisco Technical
Support contact information.
This command is not required during normal use of the router.
Note
The following show commands run automatically when you run the show tech-support bcdl command:
• show bcdl
• show bcdl consumers
• show bcdl tables
• show process bcdl_agent
• show bcdl trace location all
See the Cisco IOS XR Software command references for information about these commands and descriptions
of their command output. The Cisco IOS XR Software command references are located at the following URL:
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x
152
(Optional) Displays the command output with no compression.
Modification
This command was introduced.
Tech-Support Commands
OL-30353-01
Advertisement
Table of Contents
